Technical data
Leuze electronic BPS 307i 81
Table 13.13: BCB environmental data
Adhesive Acrylate adhesive
Strength of adhesive 0.1 mm
Adhesive strength (average values) On aluminum: 25 N/25 mm
On steel: 25 N/25 mm
On polycarbonate: 22 N/25 mm
On polypropylene: 20 N/25 mm
Recommended processing temperature 0 °C … +45 °C
Ambient temperature -40 °C … +120 °C
Dimensional stability No shrinkage, tested according to DIN 30646
Curing Final curing after 72 h;
the BPS can detect the position immediately after the BCB
is affixed.
Tear resistance 150 N
Elongation at tear Min. 80%, tested in accordance with DIN 50014,
DIN 51220
Weathering resistance UV-light, humidity, salt spray (150 h/5 %)
Chemical resistance
(checked at 23 °C over 24 h)
Transformer oil, diesel oil, white spirit, heptane, ethylene
glycol (1:1)
Behavior in fire Self-extinguishing after 15 s, does not drip
Surface Grease-free, dry, clean, smooth
Mechanical properties Scratch and wipe resistant, UV resistant, moisture resis-
tant, partly chemical resistant
To Next Page
Loading...
