www.levanteinternational.com.au
8
INSTAL LATION
1. Positioning
Install the unit on a dry, flat surface.
Leave at least 50cm space around the
unit (when the hose is not connected).
(Fig.5)
2. AIR Exhaust Duct Mounting
1) Fix the square end of the exhaust duct
2) Put the other end (outlet) to the
nearest window. Do not block the
outlet & Leave at least 50cm
for airflow around it.
NOTE:
The length of the air exhaust duct is between 600cm & 1700cm or 1800cm. To save energy,
we suggest using the minimum length of the air exhaust duct.
This length has been d
esigned according to the specifications of the a ir conditioner.
Do not use an extension or different hose as this may l ead to Air Conditioner
malfunction.
3. Window Kit Installation
The window kit has been designed to fit most standard vertical and horizontal windows.
However, it may be necessary for you to modify some aspects of the installation procedures
for certain types of windows. Please refer to the illustrations. (Fig.7 and Fig.8)
to the exhaust air grille.
To Next Page