LevelOne FEP-0800 - LED Indicator Status; Power LED Status; Link;Act LED Status; Equipment Connection Procedure

3
ENGLISH
Installation
LED Indicator
Connecting Equipment
Step1. Inspect the Power Adapter carefully, and make
sure that it is properly connected to a power
source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch
by using Ethernet cable. (e.g. Cat-5e)
LED
Indicator
Status
Meaning
Power
On
Power is on.
Off
Power is off.
Link/Act
On
Port is connected
Blinking
Transmitting / Receiving data
Off
Port is not connected
Power
Link/Act