LevelOne GSW-4876 User Manual

LevelOne
User Manual
GSW-4876
48 GE + 2 GE SFP Web Smart Switch
Ver. 1.0

LevelOne GSW-4876 Specifications

General

Number of Ports	48
MAC Address Table	16K
Jumbo Frame Support	9K
Ports	48 x 10/100/1000Base-T
Additional Ports	4 x SFP
Features	IGMP Snooping, Port Mirroring
Management	CLI, SNMP
Dimensions	440 x 44 mm

Summary

About This Guide

Purpose

Explains the guide's objective and scope for operating switch management functions.

Audience

Identifies intended readers as network administrators with basic switch knowledge.

Conventions

Details typographical and symbol conventions used throughout the guide for clarity.

Related Publications

Lists the Installation Guide and online help for additional switch information.

Revision History

Summarizes changes made in each revision of this user manual.

Section I Getting Started

1 Introduction

Provides an overview of the switch's Layer 2 switching features and management agent.

2 Initial Switch Configuration

Details connecting to the switch and performing basic IP configuration procedures.

Section II Web Configuration

3 Using the Web Interface

Explains how to access and navigate the switch's web-based management interface.

4 Configuring the Switch

Covers essential tasks for configuring system information, IP addresses, and time settings.

5 Monitoring the Switch

Describes how to monitor system information, CPU utilization, logs, and port statistics.

6 Performing Basic Diagnostics

Details network connectivity testing using Ping and running cable diagnostics.

7 Performing System Maintenance

Outlines basic maintenance tasks like upgrading firmware and managing configuration files.

Section III Appendices

A Software Specifications

Provides detailed information about the switch's software features and capabilities.

B Troubleshooting

Offers guidance on diagnosing and resolving common issues with the switch.

C License Information

Contains the GNU General Public License terms governing the use of included software.