C
HAPTER
4
| Configuring the Switch
Configuring Remote Log Messages
– 53 –
Figure 7: Time Zone and Daylight Savings Time Configuration
CONFIGURING REMOTE LOG MESSAGES
Use the System Log Configuration page to send log messages to syslog
servers or other management stations. You can also limit the event
messages sent to specified types.
PATH
Basic/Advanced Configuration, System, Log
COMMAND USAGE
When remote logging is enabled, system log messages are sent to the
designated server. The syslog protocol is based on UDP and received on
UDP port 514. UDP is a connectionless protocol and does not provide
To Next Page
Loading...
