During multicast setup, there maybe monitor/TV that
has lower resolution. For example, 1 monitor/TV with
720p resolution with mostly 1080p solutions. Please
select the monitor/TV with lowest resolution, to ensure
all can be displayed correctly.
For customer that are using 1 pair of Host/Client with
Multicast mode, the end user must update EDID
correctly. If not, it will cause many compatibility issue.
Operation:
Once the button event is triggered correctly at the
client side, when system is setup correctly for
Multicast. The selected EDID will be update to Host
Side EEPROM.
1. Static IP: 192.168.0.88
2. User can connect to http://192.168.0.88 webpage
for
firmware update.
3. Firmware update file name will be:
Host :webfwh.bin
Client :webfwc.bin
1. Reset Any changes in SPI flash setup flag.
2. After Reset to Default and reboot cycle, will use
default setting.
To Next Page