EasyManua.ls Logo

LevelOne WGR-6013 - Page 35

LevelOne WGR-6013
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Address auto configuration settings:
Auto-configuration: Disable or enable this auto configuration setting.
Auto-configuration type: You may set stateless or stateful (Dynamic IPv6).
6RD
Remote IPv4 address: Enter Remote IP Address
Remote IPv6 Address/Prefix Length: Enter the IPv6 address here; IPv6 addresses
have a size of 128 bits. Therefore, IPv6 has a vastly enlarged address space
compared to IPv4. An example of an IPv6 address is
“2001:0db8:85a3:0000:0000:8a2e:0370:7334”.Then enter the Prefix length of the
Subnet Mask here; The subnet mask was the forerunner of the modern IP address
prefix length. For example a subnet mask of 255.255.255.0 conveys exactly the same
information as a prefix length of /24, a subnet mask of 255.255.255.240 is equivalent to a
prefix length of /28.
IPv6 DNS (WAN IPv6 address) settings: You may select to obtain DNS server address
automatically or use following DNS address. You may add IPv6 address Primary DNS
address and secondary DNS address.
IPv6 SPI: The firewall settings section is an advance feature used to allow or deny

Other manuals for LevelOne WGR-6013

Related product manuals