EasyManua.ls Logo

LEVENGER CIRCA PORTABLE PUNCH User Manual

LEVENGER CIRCA PORTABLE PUNCH
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CIRCA PORTABLE PUNCH
TO PUNCH PAPER
The Circa Portable Punch handles up to three
sheets at a time and weighs just 9 ounces. It’s
also useful for punching 3 x 5 and business
cards to file in your Circa notebook or agenda.
Swing out the paper/disc line-up rule from
the underside of the punch.
1
Lift the paper holder
and slide up to 3 sheets
of paper under, at the
same time aligning
the paper with
the correct paper
size shown on the
portable punch. Push
down the paper holder
to hold the paper in place.
2
Swing the
line-up rule
back under
the paper guide
to expose the
edge of the paper to
be punched.
3
Release the lock on the
punch head by pressing
down on the punch and
sliding the lock catch to
the left. (To relock after
punching, press down and
slide the latch to the right.)
4
Align the paper into the
slot of the punch head,
then align the tab
on the punch head
with the notch on
the paper holder
.
Press down on the punch,
reposition and repeat as needed
until punching is completed.
5
LET
TER
JUN
IOR
3X5
COM
PAC
T
Paper/disc line-up rule
Paper holder
Question and Answer IconNeed help?

Do you have a question about the LEVENGER CIRCA PORTABLE PUNCH and is the answer not in the manual?

LEVENGER CIRCA PORTABLE PUNCH Specifications

General IconGeneral
BrandLEVENGER
ModelCIRCA PORTABLE PUNCH
CategoryOffice Equipment
LanguageEnglish

Summary

How to Punch Paper

Prepare Punch with Line-Up Rule

Swing out the paper/disc line-up rule from the underside of the punch before punching.

Load and Align Paper Sheets

Lift the paper holder, slide up to 3 sheets, align with paper size, and press holder down.

Position Paper for Punching

Swing the line-up rule back under the paper guide to expose the paper edge to be punched.

Release Punch Head Lock

Release the punch head lock by pressing down and sliding the lock catch to the left.

Perform Punching Operation

Align paper in punch head slot and tab with paper holder notch. Press down and repeat as needed.

How to Attach Discs

Prepare for Disc Attachment

Swing out rule, lift holder, slide up to 12 sheets, push holder down to lock paper.

Insert Discs into Slots

Slide discs into slots as shown and repeat for all available slots for attachment.

Complete Disc Assembly

After inserting all discs, lift paper holder and remove the assembled pages.

Add Additional Punched Paper

More punched paper can be added by pressing it securely over the attached discs.