EasyManuals Logo

Leviton 278-S00 User Manual

Leviton 278-S00
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
30A Flush Mount Power Outlet
INSTALLATION
English
DI-000-00278-20C
WARNINGS
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF
BEFORE WIRING!
TO AVOID PERSONAL INJURY OR DEATH, DO NOT USE THE MOUNTING SCREWS SUPPLIED IN THE WALLPLATE SCREW
HOLE. THE MOUNTING SCREWS SHOULD ONLY BE USED IN THE MOUNTING SCREW HOLES. PLEASE SEE DIAGRAM (BELOW).
• DO NOT use with single-gang wallboxes, single-gang mud rings or single-gang box extenders.
To be installed and/or used in accordance with appropriate electrical codes and regulations.
If you are not sure about any part of these instructions, consult an electrician.
NOTE: For use with #10 AWG thru #4 AWG copper, copper-clad, or aluminum wire. Tighten terminal screws to 25 in-lbs. of torque.
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
LIMITED 10 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship
under normal and proper use for ten years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit www.
leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product
is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in
accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied
warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to ten years. Leviton
is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or
delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality
Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Strip/Insert/Tighten
Dénuder/Insérer/Serrer
Pele/Inserte/Apretar
Wiring Diagram
Schéma de câblage
Diagrama de Cableado
1
2
3
1/2"
(1.3 cm)
Install/Installer/Instalar
Use 2-Gang wallplate to complete installation
Se servir d’une plaque double pour terminer l’installation
Utilice una placa de 2 unidades para completar la instalación
14-30R
125V
125V
250V
W
W
Y
X
G
G
EQUIP
GR
SYS GR
2-G Box/Boîte murale double/
Caja de 2U
WEB VERSION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leviton 278-S00 and is the answer not in the manual?

Leviton 278-S00 Specifications

General IconGeneral
BrandLeviton
Model278-S00
CategorySafety Equipment
LanguageEnglish

Related product manuals