Levoit Core 400S User Manual

5
CONTROLS & DISPLAY
On/O Button
• Turns the air purifier on/o.
• Press and hold to configure
the air purifier. See the
VeSync in-app instructions
for more information.
• Press and hold to reset the
air purifier and disconnect
from Wi-Fi (see page 7).
Fan Speed Button
• Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high
(3 indicators), and turbo
(4 indicators).
• Tapping the Fan Speed
Button while the air purifier
is in Auto Mode or Sleep
Mode (if the display is on)
will exit that mode.
Wi-Fi® Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Sleep Mode Button
• Turns Sleep Mode on/o
(see page 8).
Timer Button
• Cycles through timer
options (see page 9).
• Press and hold for 2
seconds to begin cycling
through the timer options
in 1-hour increments.
Display Lock Button
• Prevents current settings
from being changed (see
page 9). Press and hold for
3 seconds to turn Display
Lock on/o.
• The Display Lock Indicator
( ) will blink when any
other button is tapped to
indicate that Display Lock
is on.
Auto Mode Button
• Turns Auto Mode on/o
(see page 8).
Check Filter Indicator Reset
Button
• Press and hold for 3
seconds to reset the
Check Filter Indicator.
• The Check Filter Indicator
lights up when the filter
should be checked (see
page 13).
Display O Button
• Turns the display o
(see page 9).
• Tap any button (except )
to turn the display back on.
Air Quality Indicator Rings
• These indicators use an
automatic sensor to display
the air quality: Blue (Very
Good), Green (Good),
Orange (Moderate), and
Red (Bad).

Levoit Core 400S Specifications

General

Weight	11 lbs / 5 kg
Smart Features	Yes
Coverage Area	403 sq. ft.
Filter Type	True HEPA Filter, Activated Carbon Filter
Noise Level	24-52 dB
Voice Control	Yes
App Control	Yes
Filter Life	6-8 months
Voltage	120V