EasyManuals Logo

Levoit Core 400S User Manual

Levoit Core 400S
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Sleep Mode operates quietly by using a fan
speed lower than low speed.
1. Tap to turn Sleep Mode on/o.
2. Sleep Mode will turn o the display after
3 seconds if no other buttons are tapped.
Auto Mode uses AirSight™ Plus, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based
on air quality. For example, if the air quality
is bad, the fan will automatically be set to
high speed.
The PM2.5 value on the display shows the
amount of airborne particles (g) that are
detected per 1 cubic meter (m) of air volume.
PM2.5 refers to particulate matter (PM) that
is less than or equal to 2.5 microns (m) in
diameter. These particles, also known as
“fine particles”, are so small that they can only
be detected with an electron microscope,
and they stay in the air longer than heavier
particles such as dust and mold.
Your air purifier’s AirSight Plus Laser Dust
Sensor detects the amount of PM2.5 particles
that are in a given space (g/m). Generally, the
lower the number, the better your air quality.
A number above 115 indicates that there is an
unhealthy amount of fine particles in the air.
Note:
When the display is turned o, tap any
button (except ) to turn the display
back on. If you don’t tap another
button, the display will turn o again
after 3 seconds.
The Check Filter Indicator will still turn
on and stay on if it’s time to check your
filter (see page 13).
Note:
The air purifier will take 5 seconds
to detect the air quality each time
it is turned on. During this time, the
air quality indicator rings will be
blue. After 5 seconds, the air quality
indicator rings will change color
based on the detected air quality.
Auto Mode does not use the turbo
fan speed.
The VeSync app also supports
additional auto modes: Quiet Auto
Mode and Ecient Auto Mode
(see page 10).
USING YOUR PURIFIER (CONT.)
Air Quality Indicator Chart
Indicator Color Air Quality Auto Mode Fan Speed PM 2.5 Range
Blue Very Good Sleep Mode 0–35 ug/m
3
Green Good Low 36–75 ug/m
3
Orange Moderate Medium 76–115 ug/m
3
Red Bad High > 115 ug/m
3
Auto Mode
PM2.5 Display
Sleep Mode

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Levoit Core 400S and is the answer not in the manual?

Levoit Core 400S Specifications

General IconGeneral
Weight11 lbs / 5 kg
Smart FeaturesYes
Coverage Area403 sq. ft.
Filter TypeTrue HEPA Filter, Activated Carbon Filter
Noise Level24-52 dB
Voice ControlYes
App ControlYes
Filter Life6-8 months
Voltage120V

Related product manuals