7
Nozzle Attachments
Your vacuum comes with nozzle attachments
to help you tackle almost any cleanup job.
2-in-1 Crevice Tool
• Press button to slide bristles up/down
and switch between crevice tool and
dusting brush. [Figure 1.3]
• Use the crevice tool to clean hard-to-
reach places like crevices in furniture
and corners of a room or car.
• Use the dusting brush to clean dust
and hard surfaces like mantels or
baseboards.
2-in-1 Pet Tool
• Use the brush head to clean fur o soft
upholstery or pets.
• Remove the brush head to use the fur
removal tool which loosens hair on
fabric and carpet. [Figure 1.4]
Figure 1.3
Figure 1.4
Note: You can also attach the vacuum body
directly to the vacuum head. [Figure 1.7]
To use a nozzle attachment:
1. Press and hold the Vacuum Body
Release Button and gently pull the
vacuum body from the stick.
2. Slide the nozzle attachment onto the
vacuum body. [Figure 1.5]
Figure 1.5
Figure 1.6
Figure 1.7
3. Optionally, leave the stick attached
to the vacuum body and press the
Vacuum Head Release Button to
remove the vacuum head. Then, attach
the nozzle attachment to the end of the
stick. [Figure 1.6]
To Next Page
Loading...
Need help?
General
