4
How to Install Valances for Soft Vertical Shades
VISIONS
™
VALANCE INSTALLATION
STEP 1
Install the clips on the valance
• Install a valance clip about 2" in from each end. Space any remaining clips evenly
along the length of the valance.
• Insert the clip into the groove on the back side of the valance and then rotate the
clip 90°.
STEP 2
Attach the valance to the headrail
• Hook the valance clips onto the front of the headrail. Make sure the hooks fit over
the lip of the channel as shown.
STEP 3
Attach the returns (outside-mount)
• Slide a return “L” bracket into the angled end of each return.
• Press the returns into place on each end of the valance.
To Previous Page
Loading...