Getting Started
LX Power Amplifiers
1-3
HIGHLIGHTS
• 200W per channel
• Four custom designed, hand-graded output transistors per
channel
• Bridgeable architecture for higher-power output (400W at 8Ω)
• Oversized toroidal power transformer with extraordinarily low
DC resistance and thermal protection
• High-power supply voltage (160V) for extra headroom at the
outputs
• THX Ultra Certification
• Junction Temperature Simulation (JTS) to provide maximum
performance from output transistors
• Thermal protection against overheating
• Speaker protection against DC and frequencies below 10Hz
• Protection against short circuits, device failures, miswiring, and
internal faults
• Stable with mismatched, reactive, or unusual loads
• Quiet, microprocessor-controlled, forced-air cooling to
minimize chassis size
• Compatible with 2Ω speaker impedances (Individual Mode)
• Trigger input for power control from an external device
• RCA, XLR, and 1/4-inch tip/ring/sleeve inputs
• GROUND LIFT switch
• Heavy-duty gold plated outputs
• Multi-color channel status LEDs
• Rack-mount option available
PRODUCT REGISTRATION
This LX Power Amplifier can be registered by returning the Product
Registration card attached to the back cover of this user guide or
by visiting www.lexicon.com. Please also retain the bill of sale,
which represents proof of purchase and warranty.
LOCATION CONSIDERATIONS
The LX Power Amplifiers require care during installation to ensure
optimal performance. The amplifiers should be installed in an
equipment rack using an optional rack-mount kit available from
Lexicon dealers or www.lexicon.com. Leave at least 2 inches of
open space around the top, sides, and rear of the amplifier for
proper ventilation.
• Be careful when moving the LX Power Amplifers,
which are quite heavy.
• Do not obstruct the ventilation holes in the chassis.
CAUTION
To Next Page
Loading...
Need help?
General
