31
MC-1 Digital Controller
S
ystem
Configuration
L/R Balance
This control allows you to adjust the left/right balance of the front, side
and rear main outputs. This control can also be accessed on the remote
by pressing and holding the Shift button and using DONE to move to the
left, and SELECT to move to the right.
Zone 2 Balance
This control allows you to adjust the left/right balance of the Zone 2
outputs. This control can also be accessed on the remote by pressing
and holding the Record/Zone 2 button and using DONE to move to the
left, and SELECT to move to the right.
To Next Page
Loading...
Need help?
General
