Lexicon MPX-1 - Page 3

Analog Audio Input: XLR and 1/4” balanced (T/R/S)
Input Level: -2dBu to +20dBu, balanced;
-14dBu to +8dBu, unbalanced
Input Impedance: 100kΩ, balanced; 50kΩ, unbalanced
Analog Audio Output: XLR and 1/4” balanced (T/R/S)
Output Level: +18dBu
Output Impedance: 600Ω unbalanced
Digital Audio Input: Coaxial RCA
Format: 24-bit S/PDIF
Sample Rate: 44.1kHz
Digital Audio Output: Coaxial RCA
Format: 24-bit S/PDIF
Sample Rate: 44.1kHz
Conversion: 24-bit A/D; 24-bit D/A
Internal Audio DSP: 20-bit; 32-bit
Frequency Response: 20Hz - 20kHz ±1dB
Crosstalk: -60dB
THD: 0.01%, 20Hz - 20kHz
Dynamic Range: D/A: >95dB typical,
20Hz - 20kHz, unweighted
A/D: >90dB typical,
20Hz - 20kHz, unweighted
A/A: >95dB typical,
20Hz - 20kHz, unweighted
MIDI Interface: 7-pin DIN connector for MIDI IN
and powered bidirectional remote;
5-pin DIN connectors for
MIDI THRU and OUT
Footswitch: 1/4" T/R/S connector for bypass and tap
Footpedal: 1/4" T/R/S connector
(10kΩ - 100kΩ impedance)
Power Requirements: 100 - 240 volts AC, 50 - 60Hz, 25 watts
(3-pin IEC connector)
Remote Power In: 2.5 mm 9 volts AC (not included)
Dimensions: 19" W x 1.75" H (1U) x 9" D
(483 x 45 x 289 mm), rack mount standard
Weight: 6.125 lbs. (2.8 kg)
Operating Temperature: 32° to 104°F (0° to 40°C)
Maximum Humidity: 95% without condensation
MPX 1