Need help?Do you have a question about the Lexicon MX200 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| MIDI I/O | In/Out |
| Rack Spaces | 1U |
| Number of Engines | 2 |
| A/D Resolution | 24-bit |
| D/A Resolution | 24-bit |
| Sample Rate | 48kHz |
| Frequency Response | 20Hz - 20kHz |
| Effects | Reverb, Delay |
| Analog Inputs | 2 x XLR, 2 x 1/4" TRS |
| Analog Outputs | 2 x XLR, 2 x 1/4" TRS |
| Digital Inputs | 1 x S/PDIF |
| Digital Outputs | 1 x S/PDIF |
| Presets | 99 Factory / 99 User |
| THD+N | <0.007% |
| Dimensions | 19" x 1.75" |
Essential safety guidelines, electrical precautions, and usage warnings for the MX200.
Steps for powering, connecting, setting levels, and loading programs on the MX200.
Explains the differences and typical uses of parallel and serial audio connections for the MX200.
How to load and edit programs and effects on the MX200.
How to save edited programs to the MX200's user memory locations.
Details Hall, Plate, Room, and Chamber reverb effects and their characteristics.
Explains Gated, Reverse, Arena, and Spring reverb effects and their parameters.
Explains Studio, Digital, Tape, Pong, Modulated, and Reverse delay effects.
Details the De-Esser and Compressor effects and their respective control parameters.
Describes Chorus, Flanger, and Phaser effects, including their controls.
To Next Page
