Lexicon MV-5 - Page 13

Lexicon RV-5/MV-5 Serial Communications Protocol
5.3 Flag Status
Data type: 5
Selected
Input
Byte Content Code type
Power ON/OFF (bit set=on) Bit7
Main Mute ON/OFF (bit set=on) Bit6
Zone2 Mute ON/ OFF (bit set=on) Bit5
Auto EQ ON/ OFF (bit set=on) Bit4
√
Tone ON/ OFF (bit set=on) Bit3
√
Analog/Digital (bit set=digital) Bit2
unused SPARE Bit1
1
(Tuner RV-5 only) FM/AM (bit set=FM) Bit0
(Tuner RV-5 only) ST/MONO (bit set=ST) Bit7
(Tuner RV-5 only) AUTO/MAN (bit set=auto) Bit6
Display status transfer auto (bit set=on) Bit5
Ram status transfer auto (bit set=on) Bit4
Flag status transfer auto (bit set=on) Bit3
unused SPARE Bit2
unused SPARE Bit1
2
unused SPARE Bit0
13