RT-20 Universal Disc Player Setup
3-41
DISC MENU
The Disc Menu allows access to available audio, subtitle and lan-
guage parameters.
To access the disc menu:
1. While a disc is playing, press the remote control SETUP button.
2. Use the remote control and buttons to highlight Disc
Menu.
3. Press the remote control button or ENTER button.
The remote control MENU button also selects the disc menu.
TITLE MENU
To access the title menu:
1. While a disc is playing, press the remote control SETUP button.
2. Select Title Menu using the remote control and buttons.
3. Press the remote control or ENTER button.
Note:
• Disc and title menus are disc dependent.
• Title Menu will only be displayed if there are at least two titles on the
disc. For example, some DVD-Vs include more than one movie.
• In VCD2.0 and SVCD, the ENTER button functions as a conversion
switch between PBC ON and PBC OFF when the Disc Menu has been
selected during stop mode.
To Next Page
Loading...