Lexicon RV-8 - Digital Status

Basic Operation Lexicon
2-32
2CH BYPASS STATUS
Provides information about 2-channel analog input sources when
the MAIN ADV menu 2-CH ANLG BYP parameter is set to ON.
See “STATUS Menu Parameter Descriptions” on page 2-34 for detailed information.
DIGITAL STATUS
Provides information about digital input sources for which a sample
rate is detected, but no audio is present in the input signal.
See “STATUS Menu Parameter Descriptions” on page 2-34 for detailed information.
Parameter Possible Settings
INPUT The current input
MODE 2CH BYPASS
INPUT TYPE BYPASS
2CH BYPASS STATUS
INPUT
MODE 2CH BYPASS
INPUT TYPE BYPASS
Parameter Possible Settings
INPUT The current input
MODE The current listening mode
INPUT TYPE ---
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz
DIGITAL STATUS
INPUT
MODE
INPUT TYPE
SAMPLE RATE