Lexmark C510 - Page 35

30
Load paper
3 Squeeze the tabs at the sides of
the length guide together as
shown. Slide the guide to the
correct position for the size of
paper you are loading, according
to the size indicators on the bottom
front of the tray.
4 Squeeze the tabs at the sides of
the width guide together as shown.
Slide the width guide to the correct
position for the size of paper you
are loading, according to the size
indicators on the bottom left of the
tray.
Notice the load line label on the
side of the tray which indicates the
maximum stack height for your
media.
5 Flex the sheets back and forth to
loosen them, then fan them. Do
not fold or crease the media.
Straighten the edges on a level
surface.