What to do if Lexmark C925 disk is near full?
If your Lexmark Printer's disk is near full, you can touch Continue to clear the message and continue printing. Alternatively, delete fonts, macros, and other data stored on the printer hard disk. As another option, install a hard disk with higher capacity.
How to fix Lexmark C925 Printer when it is not responding?
If your Lexmark Printer is not responding, turn it off and then back on. This often resolves the issue.
Why is my Lexmark C925 printing blank pages?
If your Lexmark Printer is printing blank pages, ensure that the toner or print cartridge is not low.
What to do when Lexmark C925 Printer transfer module life warning appears?
If your Lexmark Printer displays a 'Transfer module life warning', replace the transfer module, following the instruction sheet that came with the replacement part. You can also touch Continue to clear the message and continue printing.
What to do if Lexmark C925 Printer shows USB drive error?
If your Lexmark Printer displays an error with the USB drive, remove and reinsert the flash drive. If the error message remains, the flash memory may be defective and require replacement.
How to fix 'Unformatted flash detected' error on Lexmark C925 Printer?
To resolve the 'Unformatted flash detected' error on your Lexmark Printer, touch Continue to stop the defragment operation and continue printing. You can also format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
What to do if Lexmark C925 says not enough free space in flash memory for resources?
If your Lexmark Printer indicates that there is not enough free space in flash memory for resources, delete fonts, macros, and other data stored in flash memory. Alternatively, upgrade to a larger capacity flash memory card.
What to do if Lexmark Printer says complex page, some data may not have printed?
If your Lexmark Printer displays 'Complex page, some data may not have printed', touch Continue to clear the message and continue printing.
Why Lexmark C925 print jobs do not print?
If your Lexmark Printer isn't printing jobs, first check the printer control panel for any status messages and follow the instructions provided. Ensure 'Ready' is displayed before sending a job. Also, verify that you are using the correct printer software. Other possible solutions include: removing and reinstalling the supply, removing the paper stack from the standard exit bin, loading paper in the tray. If the printer connects to your computer through a USB port, then make sure you are running a supported operating system and using a compatible printer software. Make sure the internal print server is properly installed and that the printer is connected to the network. Print a network setup page and check that the status shows Connected. If the status is Not Connected, then check the netw...
What to do if Lexmark C925 Printer waste toner bottle is nearly full?
If your Lexmark Printer's waste toner bottle is nearly full, order a replacement waste toner bottle immediately. You can also replace the waste toner bottle, or touch Continue to clear the message and continue printing.
Details on where to find setup documentation, user guides, and support resources.
Guidelines for choosing an optimal and safe location for printer placement.
Information on paper characteristics affecting print quality and reliability.
Step-by-step instructions for printing documents from Windows and Macintosh.
An overview of the printer's menu structure, categorizing options by function.
Guidance on accessing networking and administrator details via the Embedded Web Server.
How to access and utilize the printer's web-based interface for configuration and monitoring.
Recommendations for paper selection and loading to prevent paper jams.
Explains how jam messages indicate location and how to clear them.
Steps to diagnose and resolve issues when the printer is not responding.
Explains common error messages and their solutions.
Details about the printer model, machine type, and edition of the guide.
General| Security algorithms | 802.1x RADIUS, LEAP, MD5, PEAP, SSL/TLS |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Internal | Yes |
| Product color | Green, Silver |
| Package weight | 1500 g |
To Next Page
