201 paper jam
1 Open the side door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2 Determine where the jam is located, and then remove it:
a If the paper is visible under the fuser, then grasp it on each side and pull it out.
b If the paper is not visible, then you will need to remove the fuser unit.
Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.
1 Lift the handles on each side of the fuser, and then pull to remove the fuser unit.
2 Remove the jammed paper.
Clearing jams 159
To Next Page
Loading...
