Lexmark C925 - Replacing Supplies

Part name Part number
Magenta imaging unit C925X74G
Cyan imaging unit C925X73G
Ordering a fuser or a transfer module
When 80.xx Fuser life warning, 80.xx Fuser near life warning, or 83.xx Transfer
module life warning appears, order a replacement fuser or a transfer module.
When 80.xx Replace fuser or 83.xx Replace transfer module appears, install the new fuser or the
new transfer module. For installation information, see the documentation that came with the part.
Part name Part number
Fuser 40X6013 (110 volts)
40X6093 (220 volts)
Transfer module 40X6011
Ordering a waste toner bottle
When 82.xx Waste toner bottle nearly full appears, order a replacement waste toner bottle.
When 82.xx Replace waste toner bottle appears, replace the waste toner bottle.
Note: Waste toner bottle reuse is not recommended.
Part name Part number
Waste toner bottle C925X76G
Replacing supplies
Replacing an imaging unit
1 Open the front door.
Warning—Potential Damage: To avoid overexposing the imaging units, do not leave the door open for more
than 10 minutes.
Maintaining the printer 146