To Next PageTo Next Page
What to do if Lexmark C925 disk is near full?
If your Lexmark Printer's disk is near full, you can touch Continue to clear the message and continue printing. Alternatively, delete fonts, macros, and other data stored on the printer hard disk. As another option, install a hard disk with higher capacity.
How to fix Lexmark C925 Printer when it is not responding?
If your Lexmark Printer is not responding, turn it off and then back on. This often resolves the issue.
Why is my Lexmark C925 printing blank pages?
If your Lexmark Printer is printing blank pages, ensure that the toner or print cartridge is not low.
How to fix incorrect paper size error on Lexmark Printer?
To resolve the incorrect paper size error on your Lexmark Printer, try the following: Load the appropriate paper or specialty media in the proper tray. Ensure that the wheel on tray 1 is set to the paper size loaded in the tray and that this size matches what you are trying to print. Check the length and width guides of the tray to ensure the paper is properly loaded. Also, verify that the Print Properties or Print dialog settings have the correct paper size and type. Alternatively, touch Continue to clear the message and print using a different tray.
What to do if Lexmark C925 Printer shows USB drive error?
If your Lexmark Printer displays an error with the USB drive, remove and reinsert the flash drive. If the error message remains, the flash memory may be defective and require replacement.
How to resolve 'Complex page' error on Lexmark C925?
To clear the 'Complex page' error on your Lexmark Printer, touch Continue to clear the message and continue printing. Alternatively, cancel the current print job or install additional printer memory.
What to do if Lexmark C925 says not enough free space in flash memory for resources?
If your Lexmark Printer indicates that there is not enough free space in flash memory for resources, delete fonts, macros, and other data stored in flash memory. Alternatively, upgrade to a larger capacity flash memory card.
What to do if Lexmark Printer says complex page, some data may not have printed?
If your Lexmark Printer displays 'Complex page, some data may not have printed', touch Continue to clear the message and continue printing.
What to do if Lexmark C925 Printer needs supply to complete job?
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
What to do if Lexmark C925 Printer waste toner bottle is nearly full?
If your Lexmark Printer's waste toner bottle is nearly full, order a replacement waste toner bottle immediately. You can also replace the waste toner bottle, or touch Continue to clear the message and continue printing.
General| Security algorithms | 802.1x RADIUS, LEAP, MD5, PEAP, SSL/TLS |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Internal | Yes |
| Product color | Green, Silver |
| Package weight | 1500 g |
