To Next Page
L
Lynn BlairAug 31, 2025
What to do if Lexmark C925 Printer needs supply to complete job?
- SStephanie ParkAug 31, 2025
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
What to do if Lexmark C925 Printer needs supply to complete job?
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
What to do if Lexmark C925 disk is near full?
If your Lexmark Printer's disk is near full, you can touch Continue to clear the message and continue printing. Alternatively, delete fonts, macros, and other data stored on the printer hard disk. As another option, install a hard disk with higher capacity.
What to do if Lexmark C925 Printer waste toner bottle is nearly full?
If your Lexmark Printer's waste toner bottle is nearly full, order a replacement waste toner bottle immediately. You can also replace the waste toner bottle, or touch Continue to clear the message and continue printing.
How to fix streaked vertical lines on Lexmark Printer prints?
If streaked vertical lines appear on prints from your Lexmark Printer, replace the worn, defective, or empty toner cartridge.
What to do if Lexmark C925 shows error reading USB drive?
If your Lexmark Printer displays an error reading the USB drive, it may be due to an unsupported USB device. Remove the USB device, and then install a supported one.
How to fix 'Unformatted flash detected' error on Lexmark C925 Printer?
To resolve the 'Unformatted flash detected' error on your Lexmark Printer, touch Continue to stop the defragment operation and continue printing. You can also format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
What to do when Lexmark C925 Printer transfer module life warning appears?
If your Lexmark Printer displays a 'Transfer module life warning', replace the transfer module, following the instruction sheet that came with the replacement part. You can also touch Continue to clear the message and continue printing.
What to do if Lexmark C925 Printer memory is full?
If your Lexmark Printer displays a 'Memory full' message, you can touch Cancel job to clear the message. Alternatively, install additional printer memory.
How to fix incorrect paper size error on Lexmark Printer?
To resolve the incorrect paper size error on your Lexmark Printer, try the following: Load the appropriate paper or specialty media in the proper tray. Ensure that the wheel on tray 1 is set to the paper size loaded in the tray and that this size matches what you are trying to print. Check the length and width guides of the tray to ensure the paper is properly loaded. Also, verify that the Print Properties or Print dialog settings have the correct paper size and type. Alternatively, touch Continue to clear the message and print using a different tray.
Why is my Lexmark C925 printing blank pages?
If your Lexmark Printer is printing blank pages, ensure that the toner or print cartridge is not low.
Details on where to find setup documentation, user guides, and support resources.
Guidelines for choosing an optimal and safe location for printer placement.
Information on paper characteristics affecting print quality and reliability.
Step-by-step instructions for printing documents from Windows and Macintosh.
An overview of the printer's menu structure, categorizing options by function.
Guidance on accessing networking and administrator details via the Embedded Web Server.
How to access and utilize the printer's web-based interface for configuration and monitoring.
Recommendations for paper selection and loading to prevent paper jams.
Explains how jam messages indicate location and how to clear them.
Steps to diagnose and resolve issues when the printer is not responding.
Explains common error messages and their solutions.
Details about the printer model, machine type, and edition of the guide.
General| Security algorithms | 802.1x RADIUS, LEAP, MD5, PEAP, SSL/TLS |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Internal | Yes |
| Product color | Green, Silver |
| Package weight | 1500 g |
