What to do when Lexmark C925 Printer fuser is near life?
If your Lexmark Printer displays a 'Fuser near life warning', order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part. You can also touch Continue to clear the message and continue printing.
What to do if Lexmark C925 Printer waste toner bottle is nearly full?
If your Lexmark Printer's waste toner bottle is nearly full, order a replacement waste toner bottle immediately. You can also replace the waste toner bottle, or touch Continue to clear the message and continue printing.
What to do when Lexmark C925 imaging unit is nearly low?
If your Lexmark Printer's imaging unit is nearly low, order a replacement imaging unit. When print quality is reduced, install the new imaging unit, following the instruction sheet that came with the replacement part. You can also touch Continue to clear the message and continue printing.
How to install tray in Lexmark C925?
To install the specified tray in your Lexmark Printer: Turn the printer off, unplug the power cord from the wall outlet, install the specified tray, connect the power cord to a properly grounded electrical outlet, and then turn the printer back on. Alternatively, you can cancel the print job.
How to fix 'Not enough free space in flash memory for resources' on Lexmark Printer?
To resolve the 'Not enough free space in flash memory for resources' error on your Lexmark Printer, try the following: Touch Continue to clear the message and continue printing. Note that downloaded fonts and macros not previously stored in flash memory are deleted. You can also delete fonts, macros, and other data stored in flash memory, or upgrade to a larger capacity flash memory card.
How to fix Lexmark Printer when cartridge is low?
If your Lexmark printer indicates that a color cartridge is low, order a replacement toner cartridge immediately. You can also try these steps: remove the specified cartridge, firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner, reinsert the cartridge, and then touch Continue to clear the message and continue printing. Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
What to do if Lexmark C925 Printer memory is full?
If your Lexmark Printer displays a 'Memory full' message, you can touch Cancel job to clear the message. Alternatively, install additional printer memory.
How to fix incorrect paper size error on Lexmark Printer?
To resolve the incorrect paper size error on your Lexmark Printer, try the following: Load the appropriate paper or specialty media in the proper tray. Ensure that the wheel on tray 1 is set to the paper size loaded in the tray and that this size matches what you are trying to print. Check the length and width guides of the tray to ensure the paper is properly loaded. Also, verify that the Print Properties or Print dialog settings have the correct paper size and type. Alternatively, touch Continue to clear the message and print using a different tray.
Why is my Lexmark C925 printing blank pages?
If your Lexmark Printer is printing blank pages, ensure that the toner or print cartridge is not low.
How to fix Lexmark C925 Printer when it is not responding?
If your Lexmark Printer is not responding, turn it off and then back on. This often resolves the issue.
General| Security algorithms | 802.1x RADIUS, LEAP, MD5, PEAP, SSL/TLS |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Internal | Yes |
| Product color | Green, Silver |
| Package weight | 1500 g |
Details on where to find setup documentation, user guides, and support resources.
Guidelines for choosing an optimal and safe location for printer placement.
Information on paper characteristics affecting print quality and reliability.
Step-by-step instructions for printing documents from Windows and Macintosh.
An overview of the printer's menu structure, categorizing options by function.
Guidance on accessing networking and administrator details via the Embedded Web Server.
How to access and utilize the printer's web-based interface for configuration and monitoring.
Recommendations for paper selection and loading to prevent paper jams.
Explains how jam messages indicate location and how to clear them.
Steps to diagnose and resolve issues when the printer is not responding.
Explains common error messages and their solutions.
Details about the printer model, machine type, and edition of the guide.
To Next Page
