Power Saver – Reduces the power state of the printer after printing – adjustable from
1-240 minutes
Instant Warm-Up fuser – Saves energy
Eco-Mode – Conserves energy and paper through three optional settings:
Energy Saving Mode: Operator panel backlight and advance paper start are
disabled and the fuser is not continually heated
Paper Saving Mode: Device defaults to duplex printing and print log features are
turned off
Energy + Paper Saving Mode: Energy and paper saving settings are activated
Quiet Mode – Reduces noise emission by adjusting print speed, disabling advanced
paper start, disabling or minimizing beeps (key press, alarms, etc.), and adjusting fan
speed (Quiet mode may be combined with Eco-Mode)
Multi-Page Printing – Prints multiple page images on one page
Duplex – Prints on both sides of a page
Recycled Paper – Supports the use of recycled content media
Forms Card Option – Eliminates stocking paper forms
Print and Hold – Holds print jobs until released by the user at the printer interface by
entering a pin number (Hard drive option needed)
Toner Darkness Control – Adjusts the print darkness to conserve toner
Color Saver – Conserves toner by printing images and graphics lighter
To Next Page
Need help?
General
