Using the touch‑screen printer control panel
1
2 34
67 5
ABC
DEF
GHI
JKL
MNO
PQR
STU
WXYZ
Use the To
1 Display Show the printer status.
Allow printer setup and operation.
2 Home button Return to the home screen.
3 Keypad Enter numbers, letter, or symbols.
4 Sleep button Enable Sleep mode.
The following are the statuses based on the indicator light and the Sleep button:
• Entering or waking from Sleep mode
– The indicator light is illuminated solid green.
– The sleep button is unilluminated.
• Operating in Sleep mode
– The indicator light is illuminated solid green.
– The sleep button is illuminated solid amber.
• Entering or waking from Hibernate mode
– The indicator light is illuminated solid green.
– The sleep button is illuminated blinking amber.
• Operating in Hibernate mode
– The indicator light is unilluminated.
– The sleep button is blinking amber for 0.1 of a second, then goes completely unilluminated for 1.9
seconds in pulsing pattern.
The following actions wake the printer from Sleep mode:
• Touching the screen or pressing any hard button
• Opening Tray 1 or loading paper in the multipurpose feeder
• Opening a door or cover
• Sending a print job from the computer
• Performing a power‑on reset with the main power switch
• Attaching a device to a USB port
5 Stop/Cancel
button
Stop all printer activity.
Note: A list of options is displayed when Stopped appears on the display.
Menu map
Page 2 of 4
To Next Page
Loading...
