Lexmark C750 - Setup Menu; Printer Usage; Toner Alarm

5
5
Setup Menu
Use the Setup Menu to configure a variety of printer features.
Note: Values marked by an asterisk (*) are the factory default settings.
Printer Usage
Purpose:
To determine the behavior of the image transfer unit during printing.
Values:
Toner Alarm
Purpose:
To specify how the printer responds when it is low on toner.
Values:
Max Speed The image transfer unit is engaged throughout the print job.
Max Yield* The image transfer unit position is engaged based on page content. This may
extend the life of certain print supplies.
Off An error message is displayed until someone replaces the toner cartridge. If an
Auto Continue value is selected from the Setup Menu, the printer resumes printing
after the specified timeout value.
Single* Printer stops printing, displays an error message, and sounds three quick beeps.
Continuous Printer stops printing, displays an error message, and repeats three beeps every 10
seconds until the toner cartridge is replaced.