33
Load paper
4 Flex the sheets back and forth to
loosen them, and then fan them.
Do not fold or crease the paper.
Straighten the edges of the stack
on a level surface.
5 Place the paper against the back
left corner of the tray, print side
down.
Do not load bent or wrinkled paper.
Note: Do not exceed the maximum stack height indicated
on the front guide. Overfilling the tray may cause jams.
6 Squeeze the front guide lever and
slide the guide until it
firmly
touches the stack of paper.
7 Reinstall the tray.
Make sure the tray is pushed
completely into the printer.
Maximum
height guide
To Next Page
Loading...
