Lexmark C792 - Page 2

Understanding the printer control panel
#
7
123
4
5
6
Item Description
1 Display Shows the status of the printer
2 Home Lets you navigate back to the home screen
3 Keypad Allows you to enter numbers, letters, or symbols on the printer
4 Sleep Enables Sleep Mode or Hibernate Mode
The following are the statuses of the indicator light and the Sleep button:
• Entering or waking from Sleep Mode—The indicator light is illuminated solid green, Sleep button is
unilluminated.
• Operating in Sleep Mode—The indicator light is illuminated solid green, Sleep button is illuminated solid
amber.
• Entering or waking from Hibernate Mode—The indicator light is illuminated solid green, Sleep button is
illuminated blinking amber.
• Operating in Hibernate Mode—The indicator light is unilluminated, Sleep button is blinking amber for 1/10
of a second, then go completely unilluminated for 1.9 seconds in pulsing pattern.
The following actions wake the printer from Sleep Mode:
• Touching the screen or any hard button presses.
• Opening an input tray, cover, or door.
• Sending a print job from the computer.
• Performing a Power On Reset (POR) with the main power switch.
5 Indicator light Off—The printer is off.
Blinking green—The printer is warming up, processing data, or printing.
Solid green—The printer is on, but idle.
Solid red—Operator intervention is needed.
6 Stop/Cancel Stops all printer activity
Note: A list of options is displayed once Stopped appears on the display.
7 USB port Allows you to connect a USB Bluetooth adapter, or a flash drive to the printer
Note: Only the front USB port supports flash drives.
Menu map
Page 2 of 2