6
Follow these steps if you are connecting a print server to a previously installed printer:
Mac OS X
Step 8: Install the printer software.
1 Turn on your computer.
2 Insert the drivers CD that came with your printer and install the printer software. Your print server is
automatically discovered on the network.
Step 9: Print a document to verify setup.
1 Click Applications Æ TextEdit.
2 Type Test page.
3 Click File Æ Print.
4 From the printer pop-up menu, select Bonjour Printers or Rendezvous Printers Æ MarkNet N7000e
(N7002e, N7020e)
.
Note: If your print server has multiple ports, the port number and printer model number will appear beside the
print server model number.
Note: If your print server is not listed, insert the MarkNet N7000 Series CD, open the usersguide.pdf file, and
then go to the Troubleshooting section.
5 Click Print.
Note: If your print server has multiple ports, repeat steps 8 and 9 for each printer you want to connect to the
print server.
To Next Page
Loading...
