EasyManuals Logo

Lexmark MX810 E-Mail Guide

Lexmark MX810
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
E-mail Guide
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the printer control panel
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.
3 From the home screen, navigate to:
E-mail > Recipient(s)
4 Type the email address, or press # using the keypad, and then enter the shortcut number.
Notes:
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
You can also enter an email address using the address book.
5 Touch Done > Send It.
Sending an email using a shortcut number
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 Press #, then enter the shortcut number using the keypad, and then touch .
Note: To enter additional recipients, touch Next address, and then enter the address or shortcut number that you want
to add.
4 Touch Send It.
Sending an email using the address book
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
E-mail Guide
Page 1 of 4

Other manuals for Lexmark MX810

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MX810 and is the answer not in the manual?

Lexmark MX810 Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print SpeedUp to 55 ppm
Print Resolution1200 x 1200 dpi
Processor Speed800 MHz
Scan TechnologyCIS
Scan Speed (Black/Color)Up to 70/70 ipm
ADF Capacity150 sheets
Copy SpeedUp to 55 cpm
Copy Resolution600 x 600 dpi
Fax CapabilityYes
Fax Speed33.6 kbps
Standard Input Capacity650 sheets
Standard Output Capacity550 sheets
FunctionsPrint, Copy, Scan, Fax
Mobile PrintingYes
Operating System CompatibilityWindows, Mac OS, Linux
Maximum Monthly Duty Cycle300, 000 pages
Hard Disk320 GB
Duplex PrintingStandard
ConnectivityUSB, Ethernet
Scan Resolution600 x 600 dpi
Display10-inch e-Task color touch screen

Related product manuals