STARTING AND DRIVING
200
Correct use of the automatic transmission is explained in
the following parts.
(a) Normal driving
(b) Using engine braking
(c) Using the ”3”, ”2” and ”L” positions
(d) Backing up
(e) Parking
(f) Good driving practice
(g) If you cannot shift the selector lever
(a) Normal driving
31sa08
1
”P” (Park) position
2
”N” (Neutral) position
1. Start the engine as instructed in ”How to start the
engine” on page 198.
The transmission must be in ”P” or ”N”. The engine will not start
in any drive position even if the ignition switch is turned to
”START”.
To Next Page
Loading...
