STARTING AND DRIVING
199
2003 SC430 from May ’03 Prod. (OM24449U)
AUTOMATIC TRANSMISSION
Your automatic transmission has a shift lock system to
minimize the possibility of incorrect operation. This
means you can only shift out of ”P” position when the
brake pedal is depressed with the ignition switch in ”ON”
position. ()
31sa07
The shift position is displayed on the instrument
cluster.
P: Parking, engine starting and key removal position
R: Reverse position
N: Neutral position
D: Normal driving position (Shifting into overdrive
possible)
4: Position for engine braking (Shifting into overdrive not
possible)
When the cruise control is being used, even if you
downshift from ”D” to ”4”, engine braking will not be
enabled because the cruise control is not cancelled. For
the operation to decrease the vehicle speed, see page
208.
3, 2: Position for more powerful engine braking
L: Position for maximum engine braking
To Next Page
Loading...
Need help?
General
