IN CASE OF AN EMERGENCY
261
2003 SC430 from May ’03 Prod. (OM24449U)
(d) Raising the package tray
40sa10
1
Main board
2
Slide board
3
Side board
1. Put your hands under the slide board as shown and
raise the package tray gradually at 30 to 45.
NOTICE
Do not apply force directly to the side board as it moves
in accordance with the main board movement.
40sq03
1
Cable
2
Joint
2. Disconnect the joints of the cables at both ends under
the package tray using your hand.
The joints are wrapped with tape. Move the joints up and down
to disconnect them with tape. Disconnected joints should be
kept away so as not to interfere the succeeding work.
CAUTION
Take care not to injure your hands when disconnecting
the joints.
To Next Page
Loading...
