623
3-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L21U_(U)
Bluetooth
®
phone connection
There are two connection methods available — automatic and manual.
Automatic
When you register your phone,
auto connection will be activated.
Always set it to this mode and
leave the Bluetooth
®
phone on the
place where connection can be
established.
When the “ENGINE START
STOP” switch is turned to
ACCESSORY or IGNITION ON
mode, the system will search for a
nearby cellular phone you have
registered. The system will con-
nect with the phone that was last
connected, if it is nearby.
When “Display Phone Status” is
set to “On”, the connection status
is displayed. (P. 680)
Depending on the type of
Bluetooth
®
phone being con-
nected, it may be necessary to per-
form additional steps on the phone.
To Next Page
Loading...
