GS350_U (OM30C34U)
509
5-4. Using the hands-free phone system (for cellular phone)
5
Interior features
■ Call waiting
When a connected call is interrupted by the third party, the incoming
call message will be displayed.
● To talk with the other party: Select or press on the steer-
ing wheel.
● To refuse the call: Select or press on the steering wheel.
Everytime you select or press on the steering wheel after a
call is interrupted, you will be switched to the other party.
If your cellular phone is not accepted in HFP Ver. 1.5, this function can-
not be used.
■ Transferring calls
● It is not possible to transfer from hands-free to a cellular phone while driving.
● If you transfer from a cellular phone to hands-free, the hands-free screen will be
displayed, and you can operate the system using the screen.
● Transfer method and operation may vary according to the cellular phone used.
● For operation of the cellular phone in use, see the phone’s manual.
■ Repeated tone symbols
When the “p” pause tone is used, after waiting 2 seconds the tone data up until the
next pause tone will be automatically sent. When the “w” pause tone is used, the tone
data up until the next pause tone will be automatically sent after user operation.
■ While driving
Key input is unavailable.
■ Voice recognition during a call
“Send Tones” can be operated by voice recognition. (→P. 334)
■ Interrupt call operation
Interrupt call operation may differ from depending on your phone company and the
cellular phone.
To Next Page
Loading...
