EasyManua.ls Logo

Lexus GS430 2003 - Gas Station Information

Lexus GS430 2003
343 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GAS STATION INFORMATION
D Fuel selection:
Select premium unleaded gasoline with an Octane Rating
of 91 (Research Octane Number 96) or higher for optimum
engine performance. However, if such premium type
cannot be obtained, you may temporarily use unleaded
gasoline with an Octane Rating as low as 87 (Research
Octane Number 91).
D Fuel tank capacity:
75 L (19.8 gal., 16.5 lmp.gal.)
D Engine oil:
“Toyota Genuine Motor Oil” or equivalent
Oil grade: API grade SL “Energy–Conserving” or ILSAC
multigrade engine oil.
Recommend oil viscosity SAE 5W–30 if normal
temperatures are below 38_C (100_F)
Oil capacity: L (qt., lmp.qt.)
Drain and refill GS430 GS300
with filter 5.2 (5.5, 4.6) 5.4 (5.7, 4.8)
without filter 4.9 (5.2, 4.3) 5.1 (5.4, 4.5)
See page 260 for detailed information.
D Engine coolant:
Capacity: GS430: 9.0 L (9.5 qt., 7.9 lmp.qt.)
GS300: 7.7 L (8.1 qt., 6.8 lmp.qt.)
Coolant type – ”Toyota Genuine Long Life Coolant” or
equivalent
With ethylene–glycol type coolant for a proper corrosion
protection of aluminum components
For checking the engine coolant, see page 264.
Do not use alcohol type antifreeze or plain water alone.
D Automatic transmission:
Fluid type – “Toyota Genuine ATF Type T–IV”
See page 270 or 274 for detailed information.
D Tire information:
See page 282 through 289 for detailed information.
D Tire pressure:
Tire size: GS430 – 225/55R16 94V or 235/45ZR17
GS300 – P215/60R16 94V or 225/55R16 94V
Tire pressure: cold tires
kPa (kgf/cm
2
or bar, psi)
Ti
re size Front Rear
P215/60R16 94V 210 (2.1, 30) 210 (2.1, 30)
225/55R16 94V 220 (2.2, 32) 220 (2.2, 32)
235/45ZR17 230 (2.3, 33) 230 (2.3, 33)
For sustained high speeds above 160 km/h (100 mph), in
countries where such speeds are permitted by law, add the
tire pressure given below to the front tires and rear tires, but
never exceed the maximum cold tire pressure molded on
the tire sidewall.
P215/60R16 94V 90kPa (0.9 kgf/cm
2
or bar, 13 psi)
225/55R16 94V 80kPa (0.8 kgf/cm
2
or bar, 12 psi)
235/45ZR17 70kPa (0.7 kgf/cm
2
or bar, 10 psi)
This manual downloaded from http://www.manualowl.com

Table of Contents

Related product manuals