TOUCH SCREEN
233
To reconnect the Bluetooth phone
If the Bluetooth phone is disconnected with a poor
reception from the Bluetooth network when the engine
switch is selected in “ACC” or “IG−ON” mode, the system
automatically reconnects the Bluetooth phone. In this
case, the connection result is not displayed.
If the Bluetooth is disconnected on purpose such as you turned
your cellular phone off, this does not happen. Reconnect it by
the following methods.
Select the Bluetooth phone again.
Enter the Bluetooth phone.
To confirm the Bluetooth information
You can confirm or change the detailed setting of the
Bluetooth phone.
G18009
Touch the “Settings” switch of Bluetooth to display
“Bluetooth Information” screen.
To Next Page
Loading...
