190
2-5. Driving information
Apply the brakes and keep them applied.
Have someone place wheel blocks under both the vehicle and
trailer wheels.
When the wheel blocks are in place, release the brakes slowly
until the blocks absorb the load.
Apply the parking brake firmly.
Shift into “P” and turn off the engine.
● When restarting after parking on a slope:
With the transmission in the “P” position, start the engine. Be sure
to keep the brake pedal pressed.
Shift into “3”, “2”, “L”, or “R” position (if reversing).
Release the parking brake and brake pedal, and slowly pull or
back away from the wheel blocks. Stop and apply the brakes.
Have someone retrieve the blocks.
STEP 1
STEP 2
STEP 2
STEP 1
STEP 3STEP 3
STEP 1
STEP 4STEP 4
STEP 1
STEP 5STEP 5STEP 5
STEP 1
STEP 1
STEP 2
STEP 2
STEP 1
STEP 3STEP 3
STEP 1
STEP 4STEP 4
To Next Page
Loading...
