317
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
7
PHONE
GX460_Navi_OM60M79U_(U)
15.05.21 18:35
1 Display the message inbox screen.
(P.315)
2 Select the desired message from the list.
3 Check that the message is displayed.
CHECKING MESSAGES
No. Function
Select “Mark Unread” or “Mark
Read” to mark mail unread or read
on the message inbox screen.
This function is available when
“Update Message Read Status on
Phone” is set to on. (P.335)
Select to reply the message.
(P.318)
Select to display the previous or next
message.
Select to have messages read out.
To cancel this function, select “Stop”.
When “Automatic Message Read-
out” is set to on, messages will be au-
tomatically read out. (P.335)
Select to make a call to the sender.
● Reading a text message is not available
while driving.
● Depending on the type of Bluetooth
®
phone being connected, it may be
necessary to perform additional steps on
the phone.
● Messages are displayed in the
appropriate connected Bluetooth
®
phone’s registered mail address folder.
Select the tab of the desired folder to be
displayed.
● Only received messages on the
connected Bluetooth
®
phone can be
displayed.
● The text of the message is not displayed
while driving.
● Tu r n t h e “PWR/VOL” knob, or use the
volume control switch on the steering
wheel to adjust the message read out
volume.