Lexus IS300 2005 - Plate Type Lift Usage

I19099
Plate type lift
HINT :
Attachment
Right and left set position Place the vehicle over the center of the lift.
Front and rear set position
Align the attachment upper end (B) with the
Attachment dimensions 85 mm (3.35 in.)
70 mm (2.76 in.)
200 mm (7.87 in.)
100 mm (3.94 in.)

Align the cushion gum ends of the plate
with the attachment lower ends (A, C).


When using attachments, place the one for
front side vertically and the one for rear side
horizontally to the vehicle.
rocker flange front side notch.
L
B
A
C
NOTICE :
Check the interference of the attachment with the front floor cover when
placing the attachment on the plate.
-INTRODUCTION REPAIR INSTRUCTIONS
IN-9
9Author: Date:
2005 LEXUS IS300 (RM1140U)