(5) Remove the 2 bolts.
(6) Hold the areas shown in the illustration and
remove the HV battery.
Areas to be Held
Notice:
Areas to be Held
• To prevent the wire harness from being
caught, make sure to bundle the wire
harness using insulating tape or
equivalent.
• Use cardboard or other similar material
to protect the HV battery and vehicle
body from damage.
• Since the HV battery is very heavy, 2 people are needed to remove the HV battery.
When removing the HV battery, do not damage the parts around it.
• When removing the HV battery from the vehicle, do not allow it to contact the
vehicle.
• When removing/installing/moving the HV battery, make sure not to tilt it more than
80°.
(7) The HV battery pack is recyclable. Contact your Lexus distributor (if included on the HV
battery caution label) or contact the nearest Lexus dealer (see next page for samples of the
HV battery caution label).
Caution:
After removing the HV battery, do not reinstall the service plug grip to the HV
battery.
35
To Next Page
Loading...
