508
5-4. Using the audio system
LS460/LS460L_U (OM50D48U)
● MP3 and WMA playback
• When a device containing MP3 or WMA files is connected, all files in the USB
memory device are checked. Once the file check is finished, the first MP3 or
WMA file is played. To make the file check finish more quickly, we recommend
that you do not include any files other than MP3 or WMA files or create any
unnecessary folders.
• When the USB device is connected and the audio source is changed to USB
memory mode, the USB device will start playing the first file/track in the first
folder/album. If the same device is removed and reinserted (and the contents
have not been changed), the USB device will resume play from the same point
in which it was last used.
● Extensions
If the file extensions .mp3 and .wma are used for files other than MP3 and WMA
files, they will be skipped (not played).
● Playback
• To play MP3 files with steady sound quality, we recommend a fixed bit rate of at
least 128 kbps and a sampling frequency of 44.1 kHz.
• There is a wide variety of freeware and other encoding software for MP3 and
WMA files on the market, and depending on the status of the encoding and the
file format, poor sound quality or noise at the start of playback may result. In
some cases, playback may not be possible at all.
• Microsoft, Windows, and Windows Media are registered trademarks of
Microsoft Corporation in the U.S.A. and other countries.
To Next Page
Loading...
