Lexus LS 430 2004 User Manual

Lexus Supports ASE Certification
Page 1 of 9
Title:
REPAIR MANUAL SUPPLEMENT:
SMART KEY REGISTRATION
Models:
’04 – ’06 LS 430
Technical Service
Information Bulletin
June 24, 2004
EL003-04
TSIB REVISION NOTICE:
S December 9, 2005: 2005 and 2006 model years have been added to Applicable
Vehicles. Diagnostic Tester software version has been updated to 13.2a.
Previous versions of this TSIB should be discarded.
The following procedure should be used to add an additional Smart Key (Immobilizer and
Smart/Wireless functions) to the 2004 – 2006 model year LS 430.
S 2004 – 2006 model year LS 430 vehicles.
ITEM
NO.
SPECIAL SERVICE TOOLS (SSTs) PART NUMBER QTY DRW**
1
Lexus Diagnostic Tester Kit*
NOTE:
S All components from this kit/set are required
S 12 Megabyte Diagnostic Tester Program Card
(P/N 01002593–005) with version 13.2a Software
(or later) is required
LEX220036 1 8
2
CAN Interface Module Kit*
NOTE:
S All components from this kit/set are required
01002744 1 8
* Essential SSTs.
** Refers to drawer number in SST Storage System.
NOTE:
Additional Diagnostic Tester Kits, CAN Interface Modules, Program Cards, or other
SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.
OP CODE DESCRIPTION TIME OFP T1 T2
N/A Not Applicable to Warranty – – – –
ELECTRICAL
Introduction
Applicable
Vehicles
Required
SSTs
Warranty
Information

Lexus LS 430 2004 Specifications

General

Brand	Lexus
Model	LS 430 2004
Category	Automobile
Language	English

Summary

Introduction and Applicable Vehicles

Introduction to Smart Key Registration

Overview of the procedure to add an additional Smart Key for LS 430.

Applicable Vehicles for Smart Key Registration

Specifies the model years (2004-2006) and vehicles for this TSIB.

Required Tools and Warranty Information

Required Special Service Tools (SSTs)

Lists essential diagnostic tools like the Lexus Diagnostic Tester Kit and CAN Interface Module.

Warranty Information for Smart Key Registration

Details warranty applicability for the Smart Key registration procedure.

Smart Key Registration Procedure - Initial Steps

General Preparation and Tester Backlight Adjustment

Covers vehicle preparation, key insertion, and adjusting Diagnostic Tester backlight for optimal signal.

Immobilizer Function Registration - Part 1

Initiating Immobilizer Registration and Vehicle Selection

Starts Immobilizer registration, selects OBD/MOBD, and chooses the applicable vehicle model.

Immobilizer Function Registration - Part 2

Navigating Diagnostic Menus to Immobilizer Utility

Accesses the Immobilizer ID Utility through diagnostic menu selections.

Immobilizer Function Registration - Part 3

Key Sequence and Timing for Immobilizer Registration

Executes the sequence of key insertion and removal for code registration within specified timings.

Immobilizer Function Registration - Part 4

Finalizing Immobilizer Registration and Confirmation

Confirms successful Immobilizer code registration and prompts for additional codes.

Smart Key/Wireless Function Registration - Part 1

Navigating Menus for Smart Key/Wireless Function

Accesses the OBD/MOBD menu to select the Smart Key system for registration.

Smart Key/Wireless Function Registration - Part 2

Code Information and Master Key Button Confirmation

Displays registered code counts and requires master key button press for confirmation.

Smart Key/Wireless Function Registration - Part 3

Finalizing Wireless Registration and Functionality Check

Completes wireless registration, prompts for additional keys, and confirms overall Smart Key system functionality.