REPAIR MANUAL SUPPLEMENT: SMART KEY REGISTRATION – EL003-04 Revised June 24, 2004
Page 8 of 9
WHEN THIS
SCREEN APPEARS:
<CONFIRMATION>
DO THIS:
If less than 5 master codes are
registered, press “ENTER”
(If everything is correct to this point, the next screen
will appear automatically)
E
F
G
(Continued from previous page)
NOTE:
If “Remaining Time” expires
before completion of any step,
please reattempt entire procedure
from screen “C” on page 7.
(Continued next page)
1. Maximum number of
registered codes.
MASTER: [5]
SUB: [3]
2. Current number of
registered codes.
MASTER: [1]
SUB: [0]
<INFORMATION>
PRESS [ENTER]
–Please prepare the
master key which
has been registered
–Press one of the
buttons on the
master key within
30 seconds.
Remaining Time:
[19] seconds
(Within 30 seconds)
Depress any button on the
registered key (in the ignition)
and release.
DO NOT turn the ignition switch
Please execute the
following operation
with a key which
registers SMART
CODE.
PRESS [ENTER]
Press “ENTER”
Registration
Procedure:
Smart Key/
Wireless
Function
(Continued)