Lexus LS500h - Page 80

80
2-1. Instrument cluster
LC500_LC500h_OM_OM11405U_(U)
Up to 2 of the following items can be
selected.
Items displayed can be switched by
pressing or of the meter con-
trol switches to select and pressing
or .
 Current fuel consumption
*1
Displays the current rate of fuel consump-
tion
 Average fuel economy (after
reset
*2
/after start/after refuel)
*1
Displays the average fuel consumption
since the function was reset, the engine
<hybrid system> was started, and the vehi-
cle was refueled, respectively
Use the displayed average fuel consump-
tion as a reference.
 Average speed (after reset
*2
/after
start)
*1
Displays the average vehicle speed since
the function was reset and the engine
<hybrid system> was started, respectively
 Elapsed time (after reset
*2
/after
start)
*1
Displays the elapsed time since the func-
tion was reset and the engine <hybrid sys-
tem> was started, respectively
 Distance (range/after start)
*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine <hybrid system> was started
respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
<power switch> off. If the vehicle is refu-
eled without turning the engine switch
<power switch> off, the display may not
be updated.
*1
: Displayed when the item is set in “Drive
Info 1” and “Drive Info 2”.
*2
: The function can be reset by pressing
“OK” of the meter control switches for
longer than 1 second when the item to
reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
■
Eco Driving Indicator/engine oil
temperature gauge (LC500)
P.72, 74
■
Hybrid System Indicator/motor
power display (LC500h)
P.72
■
Energy monitor (LC500h)
P.89
■
Tire pressure
P.303
■
Gear positions
Displays the current shift range or gear
position when the shift position is in D
or M.
■
Units
The units of measure used can be
changed while driving.
Unlike the units setting performed on the
settings display, the units setting per-
formed on the drive information menu can
be changed while driving.