Lexus LS600h - Page 133

131
2. Instrument cluster
2
Instrument cluster
LS600h/LS600hL_EE(OM50D61E)
Press and hold the “DISP”
button after selecting the
“EXIT” by pressing the
“DISP” button.
The display goes back to step .
 System check display
After turning the power switch to ON mode, “SYSTEM CHECK” is dis-
played while system operation is checked.
 Tire inflation pressure
 It may take a few minutes to display the tire inflation pressure after the
power switch is turned to ON mode. It may also take a few minutes to dis-
play the tire inflation pressure after inflation pressure has been adjusted.
 “---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
 Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
 When disconnecting and reconnecting 12-volt battery terminals
The following information data will be reset:
 Driving range
 Average fuel consumption
 Average fuel consumption after refueling
 Distance after refueling
 Elapsed time
 Average vehicle speed
 Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
 Customization
Setting of available languages can be changed. (Customizable features P.
930)
5
1